When it comes to building a backyard fish pond it was once thought to be the providence of only the wealthy and filthy rich. That was then. Now, building a backyard fish pond and maintaining it can done by even the most modest of homeowners.
Let's dive right in.
6 Steps to Building a Backyard Fish Pond
Once you have finished building a backyard fish pond they can liven things up. And can be a good conversation starter for guests and visitors. It will not only provide a beautiful and visually appealing backyard fixture but a relaxing one as well.
From cozy and small to rich and lush, back yard ponds and gardens can range from almost any design you want. Just a little background on building a backyard fish pond and the right materials is enough to create your own private oasis.
Step One: Decide Where Your Pond Will be Situated
Look for an area in your yard where there are little trees. Falling leaves are a big no-no for your pond since it can make maintenance an everyday job.
Place your pond in an area reached by the warmth of the sun. Aquatic plants need the sun to grow. However, stay away from too much heat since this can cause some plants such as lilies to die.
Another piece of advice when building a backyard fish pond is to place your pond in a high area. This can prevent runoff water from accumulating and overflowing your pond causing murkiness and further maintenance.
Step Two: Lay Out the Area of Your Pond
If you want to design your back yard pond to the size you want it, trace the perimeter of the pond using a bendable material like a garden hose.
If you are satisfied with the size and shape of your pond, mark the area using a spray paint or any other effective marker.
Step Three: Use a Pond Liner when Building a Backyard Fish Pond
Pond liners are used to prevent water from the pond, fish, aquatic plants, and other pond contents to escape from the pond. In the same way, it also prevents non-pond materials from entering and causing dirt or excess nutrients to effect the pond.
Pond liners range from pre-formed liners to PVC liners. If you are willing to spend the extra cash, using cement can also be considered.
Pre-Formed Liners for Building a Backyard Fish Pond
Pre-formed liners are usually utilized for small back yard ponds. These can be bought at pond supply outlets and can be easily installed after digging the area for the pond. However, if you want to create the design and size you want, PVC liners will work best.
These are usually used for large and complex ponds. Other types of liners are available too. It is best to ask for advice from your local pond contractor about this stuff.
Step Four: Dig Your Pond
Dig your pond according to the width and depth that you prefer. Place rocks on the edges of the pond liner and fill in spaces with gravel. Do this part diligently and carefully. Camouflage the area with stones, pebbles, or plants.
Step Five: Assemble the Equipment
Place the filters, lighting, and water supply equipment. Make sure that these will all function well. Connect them to the electrical supply and place them in locations that will suit them best. Do not forget to make a drainage system for the pond.
Step Six: Just Add Water after Building a Backyard Fish Pond
After building your pond it is now time to fill it with water. Observe if there is any leaking. Clean out the area first and then add clean water to your pond.
Plants
Place the plants in their rightful places in order to create a beautiful appearance. Let the plants settle for at least a week and then it is okay to add the fish.
Fish
Add fish one at a time. Fill the your backyard pond with just the right amount of fish. Consider the size of the pond and your fish. Make sure they are compatible.
And now, sit back and relax. Give yourself a pat on the back for successfully building a backyard fish pond!
Now I'd like to hear from you.
If you found this post on Building a Backyard Fish Pond informative please share it on social media through the buttons on this page and/or leave a comment below.
Thank You For Reading!
Leave a comment